Blogs

Is graphite electrode on the verge of a structural change?

  • Shut down of steel and graphite electrode capacity in China and its effects
  • Reasons behind skyrocketing graphite electrode prices in 2017
  • Will the industry expand in the next couple of years?

 

Graphite electrode (GE), which is primarily used in the steel production via Electronic Arc Furnace (EAF) saw a huge surge in its prices in the past 6-8 months. This was due to a sudden and unforeseen deviation in the demand-supply dynamics. In the last 4-5 years, the global GE industry reeled from over capacity. This led to a low GE prices as the demand which is dependent on steel production through EAF route was down due to slow demand growth, excessive supply from China and higher cost of EAF steel production as compared to Basic Oxygen Furnace (BOF) route.

However, the demand-supply witnessed a significant shift by June 2017, with demand exceeding the supply (mainly in China). A sudden shift in the industry’s fortune was largely driven by China’s environmental control policy, which led to a phase-out of old, less efficient and polluting units (across industries). China’s steel and GE manufacturing companies were hit by the rule and approximately 170 million tonnes of steel capacity (~15% of China’s total installed capacity) and nearly 200,000 tonnes of GE manufacturing capacity closed in 2016-17. This had a threefold impact on the global GE industry.

  1. China’s steel exports declined by around 70-80 million tonnes in 2017 creating a void for the world steel market, which is to be filled by non-Chinese steel manufacturers. This translates into an incremental GE demand of ~50,000 tonnes since 45% of the non-Chinese steel is produced through EAF route.

  2. Closure of GE units in China led to an export decline of ~100,000 tonnes (non-ultrahigh power [non-UHP] grade) creating opportunities for GE manufacturers in other nations.

  3. The increase in Chinese EAF steel manufacturing capacity (which was 6% of the total steel manufacturing capacity in 2016 against rest of the world share of 45%) led to an increased GE demand (UHP grade) in the nation, thereby creating a new market for UHP grade GE manufacturers as China does not have the UHP grade GE manufacturing technology.

The closure of Chinese GE capacities came at a time when the global GE industry was undergoing consolidation phase and roughly 160,000 tonnes of GE capacity was shutting down across the world, (except China) in the past 3-4 years. A sudden decline in Chinese GE capacity and increased GE demand within the nation and among other countries led to a sharp surge in the Chinese non-UHP grade GE spot prices from June 2017. Though internationally GE realizations for most of the companies did not experience a similar rise as most of the GE demand-supply was pre-booked at low prices. In the past six months, the non-UHP grade GE prices increased to ~USD 16,000 from ~USD 2,000 per tonne in the Chinese spot market. In few grey markets, the spot prices reached USD 30,000 per tonne. 

Televisory believe that the UHP grade GE prices will increase in-line with the non-UHP grade GE prices in next 6 months and then there will be a gradual decline in the prices with an increase in supply on account of increased capacity utilisation. However, the GE prices are anticipated to remain much higher than the historical levels. 

The incremental GE demand (UHP and non-UHP grade) of ~150,000 tonnes from rest of the word can be easily served at the present existing capacity of ~810,000 tonnes. This can be done by increasing capacity utilisation to 90-95% from the current ~75% and changing of the UHP/non-UHP production mix. However, in order to cater to the projected increase in UHP grade GE demand from China, a fresh capacity addition would be required. According to Televisory’s estimate, China will have 200 million tonnes of EAF steel manufacturing capacity (20% of the total targeted steel capacity) by 2020, which is in-line with the domestic scrap availability of 200 million tonnes. This entails a fresh EAF capacity addition of 150 million tonnes and a consequent UHP grade GE demand of ~200,000 tonnes. Subsequently, Televisory foresee a global GE manufacturing capacity expansion (mostly UHP grade) by 25-30% in the next 2 years.

However, availability of needle coke (the key raw material for GE manufacturing, the supply of which is controlled by few players) remains a significant balancing variable in the demand-supply equation. Traditionally, needle coke supply and its prices were controlled by few producers and GE manufacturing industry was the price taker. Televisory expect needle coke prices to imitate the surge in GE prices and supplies increasing but will remain in control as needle coke manufacturers will not compromise on their bargaining position. There is also a possibility of a shift in contract booking from pre-agreed volume and price to a pre-agreed volume at spot price for both the needle coke and GE.  

Televisory presume that the global GE industry is on the verge of a structural change. How much will it materialise? Is need to be seen. 

Your Rating

Slack set out to kill E-mail

Started as a side project for internal use in a gaming company High revenue growth with recurring revenues Went Public by offering shares through the Direct Public Offering ...

Will the Big Bang merger drive, of Indian Public Sector banks, provide the required impetus to the slowing economy?

India’s Government announces plans to merge 10 of the country’s public sector banks Probable impact of the mergers   India’s Finance Minister, Nirmala Sitharaman,...

Is Mothercare on the verge of collapse?

History of Mothercare What went wrong? Company moved into administration   Mothercare, an iconic brand for babies, children and parents to be, went into...

Rapidly growing Indian online food delivery industry and its unrealised profits

Evolution of online food delivery industry in India Geographical penetration and scope for expansion Key players and their zeal to balance revenue and costs   Online...

Tire manufacturing industry, analysing the cost and margin trends

The global market for tire manufacturing stands at $180 billion. Michelin anticipates the long-term demand to rise at the rate of 5 to 10% a year in developing markets and 1 to 2% a year in mature...

An analysis of Malaysian rubber glove industry

How big is the international rubber gloves market? Reasons behind the healthy and steady growth Malaysia’s role in the industry Why are companies struggling for stable...

Failure of Amazon in China, an analysis

E-commerce market in China Online consumer product retailers in China Performance of Amazon in China   Amazon is a global e-commerce player selling a wide...

Can lithium-ion anode demand for needle coke reduce availability for electrode players?

What is needle coke? Uses of needle coke Lithium-ion battery manufacturers demand needle coke   Needle coke? Needle coke is a specialised form of petroleum coke...

Indian wood panel industry, growth drivers and present trends

Current market scenario in the Indian plywood industry Growth in the housing sector and rapid urbanisation to provide the boost GST rationalization to reduce price difference...

Is the radio broadcasting industry in the U.S. dying? An analysis

Radio, the most powerful medium of reach in the U.S. Why the industry is moving at a slow pace? Radio’s health is still sound, will it continue in the long-term?   ...

Housing finance market in India. Is affordable housing driving the growth?

Overview of the housing finance sector in India Key players dominating the segment and their dynamics Factors driving aggressive demand for housing   The housing...

Carbon black industry, strong potential for supernormal profitability?

What is carbon black? Its uses Impact of the environmental curbs in China   What is carbon black? Carbon black is a fine carbon powder and it is a disorderly...

Malaysian rubber glove industry, an update

Rising global demand for gloves Impact of USP 800’s implementation and the US-China trade war on Malaysia’s rubber gloves industry Key challenges for the Malaysian rubber...

Rice industry outlook 2018

Major rice producers and consumers Global rice trade Factors dominating the trade   Rice is the 3 rd largest produced agricultural commodity in the world, after...

Education industry in India, an overview

Growth of private universities in the nation Future potential of the education industry in India   The education sector in India is estimated to be worth USD 91.7 billion...

Battle for the textile and apparel industry in Southeast Asia

The reasons for China’s decreasing presence in the industry Initiatives by the governments in Southeast Asia to boost the textile trade Vietnam and Bangladesh’s quest to conquer...

Blockchain, an emerging concept, a disruptive technology (Part 1)

What is blockchain? How is blockchain revolutionary? Cryptocurrency, the new money ICOs, the new way of raising money Summary Blockchain is a software architecture...

Rise of Ant Financial, will the success story continue?

What is Ant Financial? Journey to become king of unicorn Will regulatory curbs hinder its success journey?    Ant Financial, an affiliate and integral part...

Unnoticed growth of the media and entertainment industry in India

Overall industry brief Growth of the M&E industry and its segments Major supporting elements of this growth   Media and Entertainment (M&E) is a very wide industry...

Sri Lankan economic and political crisis

Sri Lanka’s latest political crisis, who governs the nation? Poor economic indicators adding to the nation’s woes   Sri Lanka is currently embroiled in a political crisis,...